APEX¥ v2.0
(INFINITY v2.0)
Features:
- Advanced peak detector automatic cut-off circuit with MOSFET and linear current charges battery to 100% without overcharging.
- Selectable 0DV and -DV cutoff technology for NICAD and NIMH battery respectively.
- 8-bit 12MHz CPU with 32k ROM, 2k RAM, 4 channel 16 bit ADC, and 2 channel 10-bit DAC current control output.
- Output current automatic dec. if overload.
- Built-in watch-dog timer.
- Reverse polarity protected.
- Recharges 1 - 10 cells 100mAh - ¥mAh. Output current can be changed from 0.1A to 6.5A ( 0.1A step) and discharging current is 0.1A to 3A (0.1A step) with automatic discharger cut off voltage setup.
- 16 character dot-matrix LCD, display with output V, output A, mAh, time, average V, Wh, peak V, set charger A, set discharger A, input V and mode.
- Precision level reaches to 2 unit places and 3 decimal places. e.g. 11.934V.
- Built-in cooling fan.
Specification:
Input
Voltage: DC 11V to 15V, 12V lead-acid battery or APEX V12 220V AC S.P.S
Current
drain: max approx 10A
Normal
battery voltage: 1.2V to 12.0V (1 to 10 NICD / NIMH cells)
Charge
current: 0.1A to 6.5A up to 15V, 0.1A to 4.0A over 15V
Automatic
charge termination: Delta Peak process
Trickle
charge current: approx. 80mA
Discharge
current: 0.1A to 3.0A
Discharge
termination: automatic, at approx. 0.8V / cell
Max. discharge
power: approx. 25W
Protective
functions: Polarity protection at inpur and output, short-circuit protection
on output, overheating protection, low voltage protection.
Fuse: 7.5A
car fuse
Dimensions:
approx. 100*140*52mm