APEX
0 (ZERO)
Features:
- Advanced peak detector automatic cutoff circuit with MOSFET and linear current charges battery to 100% without overcharging.
- 8-bit 12MHz CPU with 64k bit ROM, 2k RAM, 6 channel 18 bit ADC, and 2 channel 10-bit DAC current control output, max output power 198W.
- Output current automatic dec. if overload.
- Built-in watch-dog timer.
- Reverse polarity protected.
- Recharges 1 - 30cells 100mAh - ¥mAh. Output current can be changed from 0.1A to 12A (0.01A step) and discharging current is 0.1A to 22A (0.01A step) with discharger cut off voltage setup from 0.1V to 50V (0.001V step).
- 16 character dot-matrix LCD, display with output V, output A, mAh, time, average V, peak V, set charger A, set discharger A, set discharger cutoff V, input V, TX&RX V, temperature, set charging cut temperature, set charging delta V, Wh, mode.
- Set charging cut off voltage setup form 0.1V to 53V (0.001V step) for charging Li-ion Battery.
- Set to 0 Delta Voltage for charging Ni-MH, set 3mV - 20mV/cells for charging Ni-cd.
- Delay mode for over 40oC make delay at mode change.
- Long display and short display selection.
- Connect PC (RS-232), in PC display curve, save file and print label (option parts).
- With TX&RX output charger 1-8 cells 250mA fixed.
- Built-in cooling fan.
Specification:
Input Voltage: DC
12V to 15V min 40A.
Output range: 1 to
30 cells (50V MAX.) 100 mAh to ¥mAh.
Charging current:0V-20V 0.1 to 12 Amp, 20V-30V 0.1 to 8 Amp, 30V-40V 0.1 to 6 Amp, 40V-50V0.1 to 5 Amp. (0.01 step)
Discharging current:0V-10V 0.5 to 22 Amp, 10V-14V 0.5 to 15 Amp, 14V-20V 0.1 to 11 Amp, 20V-30V 0.5 to 7 Amp, 30V-40V 0.5 to 5 Amp, 40V-50V 0.5 to 4 Amp.(0.01 step)
TX&RX output range: 1 to 8 cells 250 mA fixed.
Weight 950g.
Size 180*180*70mm